The advantages of technology are virtually uncountable today and we hardly perceive them because of how well we are used to living with it. However, we are aware of its disadvantages from time to time this leaves us ‘lying’ one of which is iPhone wont turn on.
An example of this is an iPhone that does not turn on, which can scare us a lot. That is why in this post we invite you to remain calm and know what the possible causes why iPhone wont turn on are and how you can solve it.
iPhone Wont Turn On Possible Causes
There are already many iPhone that have reached the market since 2007, but you have the model you have and even the most recent iPhone 11, you may encounter the problem of not being able to turn on your device.
Obviously it is understood that if you have arrived here it is because your device is turned off and does not react to the presses on the corresponding power button.
First of all, if you have an iPhone 6s or iPhone 6s Plus you should know that these are part of a free Apple repair program through which they solve the problem.
This is due to the fact that some terminals manufactured between October 2018 and August 2019 have come up with a factory problem that causes them to have more problems that those iPhone wont turn on than normal at the time of switching on.
One of the causes that your iPhone does not react when you try to turn it on is because the button has stopped working. It is not that this is something habitual, but in the end everything ends up wearing out and these buttons are not freed either.
Although we insist on emphasizing that it is not usual. If your iPhone is new or does not have a long time of use, it is likely that this button or some part of the internal circuits that connects it is defective.
The damages by liquids are the most possible cause and that almost with total probability you can have your iPhone wont turn on. The worst enemy of an electronic device is water or any other liquid element.
Despite the fact that a device has IP68 certification, the seal may not be completely correct and some liquid could have been cast. Also exposing the device in wet situations can cause this.
Also an accidental fall or blow to the device could be a more than obvious cause for the reasons why iPhone wont turn on to function normally, in this case so that it does not turn on.
There are occasions in which, after a blow, some internal component of the equipment has been defective and nevertheless being able to function for a certain time until it shows the final failure.
Once we have seen the possible hardware problems we have to focus on the software. This is also not a common reason why an iPhone wont turn on, but there is always the possibility that it is a problem with the operating system that is preventing the terminal from turning on correctly.
You may also like: iPhone Lost Mode Tutorial | Find The Lost Or Stolen iPhone
How To Solve The Problem iPhone Wont Turn On
Reading the above information makes you aware of possible causes, but unfortunately you will not be able to know at a glance if your iPhone has any of those problems. However, all is not lost and you can try several solutions.
The first thing you can try is to make a hard reset to the iPhone. To do this you must connect the iPhone to your computer by cable, regardless of whether it is Windows or Mac.
Once this is done, start iTunes and check if the program has detected the iPhone and if it has been turned on. If so, the chances of a button failure increase, however and to rule out that it is not some software you should try to restore the device from iTunes to see if that is resolved.
If iTunes has not recognized the iPhone or it has been turned on you should try a combination of buttons that varies depending on the device model when iPhone wont turn on:
✅ For the iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro and 11 Pro Max: you must quickly press and release the volume up, volume down button and finally press and hold the side button power until an image that says “connect to iTunes” appears on the screen.
✅ For iPhone 7 and 7 Plus:you must keep the volume up and down buttons at the same time until an image that says “connect to iTunes” appears on the screen.
✅ For iPhone 6s, 6s Plus and earlier:you must press the start button and the power side at the same time until an image that says “connect to iTunes” appears on the screen.
If still this doesn’t work and iPhone wont turn on or show any signal despite having made the above instructions, you only have to go to repair it.
You can visit the Apple technical service website and try to make an appointment at an Apple Store or Authorized Technical Service (SAT). You also have a chat where they will attend you at a certain time.
How Much Will The Repair Cost You?
Well it depends on several factors. If the iPhone is under warranty and the problem is not due to damage or humidity, you may not have to pay anything to fix it.
If the device is no longer under warranty it is very likely that you will have to bear the cost of the repair, regardless of the causes. Nor can an exact price be affirmed, since depending on the problem that causes it, it can vary.
Have you been successful to solve the problem of iPhone wont turn on? Have you found any other solution? If you have any further queries You can tell us in the comment box below.